Sponsor Directory

Raptor 575

Moderator: Raptor_Engineering

Raptor 575

Postby Kennz » Tue May 22, 2018 3:13 pm

Hi.Looking at at putting 575 in commercial jet boat in NZ.questions. Are you aware of any in commercial boats in the states runing them. If so what hrs are they upto or any private boats with high hrs. What is the fuel burn at 3500 rpm.Thanks.
Kennz
Deck Swab
 
Posts: 2
Joined: Tue May 22, 2018 3:01 pm

Re: Raptor 575

Postby 300club » Mon Jul 02, 2018 1:30 pm

Im running one in a private boat.
I think if you are actually run ing 3500.
Your going to be right about 13.5. Gallons per hour..
300club
Novice Baiter
 
Posts: 323
Joined: Mon Mar 24, 2014 5:10 pm

Re: Raptor 575

Postby Riverjohn » Mon Jul 02, 2018 3:36 pm

Kennz wrote:Hi.Looking at at putting 575 in commercial jet boat in NZ.questions. Are you aware of any in commercial boats in the states runing them. If so what hrs are they upto or any private boats with high hrs. What is the fuel burn at 3500 rpm.Thanks.

There was a post on here a while back about a Tour boat running 3 of them out of Grants Pass Oregon. You might be able to call or email them to find out how they are doing. I think they just put them in this season.

http://hellgate.com/
User avatar
Riverjohn
Captain
 
Posts: 1605
Joined: Thu Jan 31, 2008 4:08 pm

Re: Raptor 575

Postby tjmp111 » Wed Jul 04, 2018 9:06 am

300club wrote:Im running one in a private boat.
I think if you are actually run ing 3500.
Your going to be right about 13.5. Gallons per hour..



How big of a boat? I am no where near13.5 per hour. I am pushing 7, 9 at the highest.
1997 22' TJ, 575 Raptor, Scott 912
tjmp111
Beer Boy
 
Posts: 73
Joined: Wed Jan 29, 2014 7:44 pm
Location: Ellensburg, WA

Re: Raptor 575

Postby 300club » Tue Jul 31, 2018 10:50 am

My boat is 23'8" full hard top ect.
weighs 5820 full of fuel nothing else in it.. i usually run around 10. But he said he wanted to figure it at 3500 rpms.. if that's where he runs it consistently.. that's about where he should be for gph.. also will be better in flat water.. . My numbers are on the snake.
300club
Novice Baiter
 
Posts: 323
Joined: Mon Mar 24, 2014 5:10 pm

Re: Raptor 575

Postby tjmp111 » Wed Sep 05, 2018 8:59 pm

300club wrote:My boat is 23'8" full hard top ect.
weighs 5820 full of fuel nothing else in it.. i usually run around 10. But he said he wanted to figure it at 3500 rpms.. if that's where he runs it consistently.. that's about where he should be for gph.. also will be better in flat water.. . My numbers are on the snake.



Some numbers from the snake. 5.3 hours on the motor burned 31 gallons of fuel. Raptor 575 and a Scott 912.
1997 22' TJ, 575 Raptor, Scott 912
tjmp111
Beer Boy
 
Posts: 73
Joined: Wed Jan 29, 2014 7:44 pm
Location: Ellensburg, WA


Return to Indmar Marine Engines

Who is online

Users browsing this forum: No registered users and 1 guest

cron