Sponsor Directory

Need a good mechanic/ fabricator chico area

Need a good mechanic/ fabricator chico area

Postby Drtygirls » Tue Nov 26, 2013 4:59 pm

I need a new boat Dr. I used to go to jetstream in yuba when Phil was there and had nothing but good things to say. Like all things though good or bad that is not the case as Phil is no longer there and after taking my boat there this spring it's obvious that when Phil left so did the reputation. I won't go into details but I had a bad experience with a pretty simple routine maintenance and ended up doing it for the 2nd time myself along with some other issues which were caused by the first repair. Anyhow I have a bad strake on my boat and need it fixed and jetstream is out of business I believe as could not get ahold of them to talk about my boat when I had issues phone disconnected etc... I just thought I would ask if any of you guys know of any other good boat guys around Chico, yuba, redbluff , or fairly close. Thanks, Josh
Drtygirls
Deck Swab
 
Posts: 1
Joined: Mon Nov 11, 2013 2:21 am

Re: Need a good mechanic/ fabricator chico area

Postby Calredneck » Wed Nov 27, 2013 10:20 pm

don't use All About Boats No No No.
User avatar
Calredneck
Forum Enthusiast
 
Posts: 373
Joined: Sat Dec 01, 2012 12:29 am
Location: Russian River CA

Re: Need a good mechanic/ fabricator chico area

Postby GirthyTrout » Thu Nov 28, 2013 7:15 pm

Never had bad service from Outboard Center in Redding.
Girthy
GirthyTrout
Beer Boy
 
Posts: 69
Joined: Fri Aug 12, 2011 1:11 pm
Location: Redding, CA

Re: Need a good mechanic/ fabricator chico area

Postby odwil » Sun Jan 05, 2014 11:36 pm

you might give Campbell craft in Oroville a call and talk to Steve tell him I told you will
odwil
Buoy Boy
 
Posts: 148
Joined: Sun Oct 14, 2007 11:17 pm

Re: Need a good mechanic/ fabricator chico area

Postby frey231686 » Sat Nov 15, 2014 11:11 pm

Man my boat at Johnson bait and marine also known as jet stream concept
frey231686
Deck Swab
 
Posts: 7
Joined: Sat Nov 15, 2014 9:29 pm

Re: Need a good mechanic/ fabricator chico area

Postby Jaare » Mon Nov 06, 2017 2:27 pm

Wondering why calredneck says not to use All About Boats in Chico? Only found two reviews and both very positive??

thanks,
Jaare
Deck Swab
 
Posts: 1
Joined: Mon Nov 06, 2017 2:10 pm

Re: Need a good mechanic/ fabricator chico area

Postby Admin1 » Mon Nov 06, 2017 5:01 pm

Jaare wrote:Wondering why calredneck says not to use All About Boats in Chico? Only found two reviews and both very positive??

thanks,

You are now approved to post. Please send calredneck a PM and you guys can discuss his reasons that through PM's and not on the open forum..
Admin1
Novice Baiter
 
Posts: 328
Joined: Mon Dec 20, 2010 2:48 pm


Return to California

Who is online

Users browsing this forum: No registered users and 2 guests

cron