Sponsor Directory

New 7 7/8 Jets for Evinrude G2 225+ hp Big Bore

Discuss everything to do with Outboard Jets.

New 7 7/8 Jets for Evinrude G2 225+ hp Big Bore

Postby Captainvette » Thu Mar 19, 2020 11:01 am

I have seen a bunch of very recent videos on YouTube showing the new 7 7/8 jet pump from Outboard Jets that fits the new style Evinrude 225-250 HP G2 outboards.

We have been waiting for these jet pumps for YEARS.... still no info about them on the official website.... yet there it is on a big G2 250 HO pushing a 20 foot boat around at 45mph getting up on step in less than a boat length right on YouTube.

This is amazing news. I have a 2016 Custom Weld Shallow Water 20' with a 1997 Evinrude 225 Vindicator and have been waiting for this.

Just thought I would share for all the guys with the big bore outboard jets
Captainvette
Deck Swab
 
Posts: 4
Joined: Wed Feb 12, 2020 7:55 am

Re: New 7 7/8 Jets for Evinrude G2 225+ hp Big Bore

Postby eby8510 » Thu Mar 19, 2020 11:35 am

Will you post the link to the Youtube video? I cant find it..
eby8510
Beer Boy
 
Posts: 95
Joined: Thu Mar 20, 2014 8:52 am

Re: New 7 7/8 Jets for Evinrude G2 225+ hp Big Bore

Postby Captainvette » Thu Mar 19, 2020 2:16 pm

eby8510 wrote:Will you post the link to the Youtube video? I cant find it..



Surly....
https://youtu.be/kIJDJeZoSEo

https://youtu.be/fkzCc3USbUA
Captainvette
Deck Swab
 
Posts: 4
Joined: Wed Feb 12, 2020 7:55 am

Re: New 7 7/8 Jets for Evinrude G2 225+ hp Big Bore

Postby Susitna907 » Thu Mar 19, 2020 4:29 pm

Captainvette wrote: I have a 2016 Custom Weld Shallow Water 20' with a 1997 Evinrude 225 Vindicator and have been waiting for this.


I had a 2017 20' Shallow Water as well but with a 2017 ETEC 200HO on the back. It came with a stock 7 5/8" setup. I did a test on a lake with it. I then swapped it all out for the 7 7/8" setup and compared notes.
Immediately the holeshot was quite noticeable.
Top speed gain was about 4mph. It did great.
Susitna907
Beer Boy
 
Posts: 77
Joined: Thu Jan 05, 2017 3:47 am
Location: Wasilla, Alaska

Re: New 7 7/8 Jets for Evinrude G2 225+ hp Big Bore

Postby Captainvette » Thu Mar 19, 2020 7:53 pm

Susitna907 wrote:
Captainvette wrote: I have a 2016 Custom Weld Shallow Water 20' with a 1997 Evinrude 225 Vindicator and have been waiting for this.


I had a 2017 20' Shallow Water as well but with a 2017 ETEC 200HO on the back. It came with a stock 7 5/8" setup. I did a test on a lake with it. I then swapped it all out for the 7 7/8" setup and compared notes.
Immediately the holeshot was quite noticeable.
Top speed gain was about 4mph. It did great.


When I bought this boat new it had a 115 hp Honda 4 stroke on it and I had them rip that thing off lol and replace it when a 225 Evinrude Vindicator HOWEVER the only used pump we could find for it was a 7 3/8. We put the 4 blade V6 impeller in it and it helped but obviously the 7 5/8 pump would have been better.... so ever since I've been looking for a 2012-2017 225 evinrude with a 20 inch shaft but it still takes 6 months to order the 7 7/8 pump.... but now this guy in the video says he has the whole setup 250 g2 and pump in stock.
Captainvette
Deck Swab
 
Posts: 4
Joined: Wed Feb 12, 2020 7:55 am


Return to Outboard Jet

Who is online

Users browsing this forum: No registered users and 2 guests

cron