Sponsor Directory

Scott question

Moderator: Scottwaterjet

Scott question

Postby ralphy » Sat Jun 07, 2014 10:53 am

Hello Jeff. I bought a set of Scott blades used. 19 bullet looked great. So I put it in front of a 19 and a 24 kem blade. Worked wonders on performance. I now have a Scott 22 and 24. The 24 looks good but the 22 has a different shape and it looks like one of the corners is rounded off. Just wondering what I got and if I can run it like this. Thank you Chris.
Attachments
image.jpg
24
image.jpg
22
image.jpg
22
ralphy
Buoy Boy
 
Posts: 149
Joined: Thu Nov 14, 2013 9:16 pm

Re: Scott question

Postby rockchuckar » Sat Jun 07, 2014 11:54 am

Ralphy- If you are worried about the rounded out corners send the impeller to Jetco In Asotin WA and have them rebuild it.
User avatar
rockchuckar
Forum Sponsor
 
Posts: 908
Joined: Tue Sep 04, 2007 9:21 pm

Re: Scott question

Postby ralphy » Sat Jun 07, 2014 1:10 pm

Ok was not sure. Is the curve of the leading edge normal for this impeller? The 24 has a straight edge and the 22 has a curved edge. I will most likely just put it in a see what happens then rebuild later thanks for the info on where to have it rebuilt. I was wondering about that. Thanks for the help
ralphy
Buoy Boy
 
Posts: 149
Joined: Thu Nov 14, 2013 9:16 pm

Re: Scott question

Postby Scottwaterjet » Sun Jun 08, 2014 8:22 pm

Hi what you are seeing there is when the impellors have been tidied up/sharpened someone has slightly rounded off one corner, this generally has little effect on performance and we would generally recommend fixing that when the impellors are reconditioned
User avatar
Scottwaterjet
Forum Page Sponsor
 
Posts: 64
Joined: Tue Jan 29, 2013 12:42 pm

Re: Scott question

Postby ralphy » Sun Jun 08, 2014 8:58 pm

Ok thank you for the information. The Scott bullet I put in really made my boat come alive. I can't wait to get the other two in and see what a full set of Scott's will do. You make an impressive product. Thanks
ralphy
Buoy Boy
 
Posts: 149
Joined: Thu Nov 14, 2013 9:16 pm


Return to Scott Waterjet

Who is online

Users browsing this forum: No registered users and 1 guest

cron